Nikwax Fabric & Leather Proof Waterproofing for Fabric and Leather 125 ml

This Nikwax Fabric & Leather Proof Waterproofing for Fabric and Leather, in sponge format, is specially designed to be applied on combined fabric and leather footwear and provides Durable Water Repellency (DWR) , while maintaining breathability.


The use of footwear that combines leather and textile is perfect when practicing outdoor activities, as it results in lightweight and breathable footwear. Although its water repellency is lower than that of footwear made entirely of leather. Normally, the combined footwear leaves the factory with a water-repellent treatment, and a breathable and waterproof membrane, that is, it allows the evaporated sweat to escape but prevents the entry of any liquid from the outside. However, the water-repellent layer is lost with use, so that in shoes that do not have a membrane, water will enter from the outside, wetting the feet, and in those that do have a membrane, the wet area will decrease the breathability of the membrane, making that the sweat cannot evaporate and ends up wetting the feet.

That is why it is essential to use Nikwax Fabric and Leather Proof Waterproofing for Fabric and Leather, to restore the Durable Water Repellency (DWR) of the combined footwear, while maintaining its breathability, and thus the feet they will always be dry even if the exterior is wet.

Dirty footwear can cause water to be absorbed, so it must first be cleaned with NIkwax Footwear Gel. Subsequently, Nikwax Fabric and Leather Proof Waterproofing for Fabric and Leather can be applied.

There are other waterproofing products on the market but they can reduce or eliminate the breathability of footwear, causing the feet to get wet due to condensation . There are also products that can be harmful to the health of the user and the environment, such as those that use fluorocarbons, or aerosols that are flammable. There are others that are solvent-based that have to be applied on dry material, while Nikwax Fabric and Leather Proof Waterproofing for Fabric and Leather can be applied on both wet and dry material.

Nikwax has prioritized reducing the impact on the environment in the use of its products. That is why Nikwax Fabric and Leather Proof Waterproofing for Fabric and Leather is a safe-to-use product for combined waterproof and breathable fabric and leather footwear, it is aqueous, environmentally friendly, safe to use, non-aerosol, non-flammable, without harmful solvents. neither volatile organic compounds nor fluorocarbons and respectful with the environment.

This Waterproofing for Fabric and Leather from Nikwax Fabric and Leather Proof, has a size of 125 ml.

It is applied quickly and easily on wet boots, thanks to its sponge applicator, and provides Durable Water Repellency (DWR) during the drying process at room temperature.

This product It is administered with the sponge applicator.
- If the footwear is dirty, clean first with NIkwax Gel for Footwear.
- Subsequently, the waterproofing can be applied without the footwear drying out.
- Shake the product well before application. To break the seal, press the sponge applicator.
- Administer abundant waterproofing with the sponge on wet footwear.
- Wait 2 minutes to remove the excess product with a cloth and let it dry before applying its use.


It is possible that the skin or the fabric darkens, so it is recommended to apply it first in a non-visible area.
For a correct drying it is recommended to leave it at room temperature, without applying any source of heat, since rapid drying can cause the skin to split.
It is also advisable to fill the ends with paper so that excess moisture is absorbed, and change it each time let it get wet.